7 Tips to Prepare Your Vehicle for Winter

Windshield Wipers and Fluid – Fog, snow and rain will cut down your visibility in winter, causing you to use your wiper blades and washer fluid much more than normal. An antifreeze solution along with winter wiper blades will help to fight ice build-up. Keeping extra windshield washer solvent on hand is helpful too!

Battery – A thorough inspection of your battery, cables, terminals and fluid will help to make sure your car is ready for winter. The cold weather puts more stress on your battery. Many automotive parts stores will test your battery capacity free of charge.

Inspect Your Tires – If you’re not mounting winter tires on your vehicle, be sure to examine your current tires for remaining tread life, uneven wearing and cupping as well as checking the sidewalls for cuts and nicks to help you to know if your tires are ready for the harsh weather. The colder weather will also reduce the pressure within your tires, causing them to perform poorly in the snow. You should frequently check your tire pressures.

Coolant – Along with regulating the engine temperature, a vehicle’s coolant system is responsible for protecting your engine against corrosion. For the winter season you will want to make sure that you are using the right ratio of coolant to water in your system as well as using the right type of coolant for your car. If you are unsure, you can check the effectiveness of your coolant with a simple and inexpensive test found at any car parts store.

Ice scraper – Keep your ice scraper in your vehicle and always clean off your car completely, not just a little peephole in the windshield. You must be able to see all your surroundings, your side mirrors and through your back window. Snow on top of your car could slide down and cover your windshield while you are slowing down or fly off onto someone else’s vehicle while you are driving. In some states it is the law that your vehicle is clear of snow and ice.

Survival Kit – Especially during times of slick road conditions and below freezing temperatures, you will want to keep a survival kit in the car at all times in case of emergency. Some items to consider include extra gloves, boots and blankets, flares, tire chains, a flashlight and extra batteries, car charger or portable cellphone charger, and a whistle. Also check your spare tire and make sure that your car jack is in good, working condition.

Keep Your Gas Tank Above Half – If you get stuck or stranded, the car’s engine will be your only source of heat and you will want to be sure you have enough fuel to keep you warm. In some cases, it may be necessary to remove snow from behind the tailpipe and keep it unobstructed to prevent lethal gas from accumulating in the vehicle.

Posted in homepage, Uncategorized | Comments Off

Useful Travel Tips About Seasons And Weather in Langkawi

Langkawi has the same type of climate as Thailand. It is known as a tropical monsoon climate. It can sometimes also be labeled as a “tropical wet climate” although that’s not always the case year round. It’s paradise climate makes Langkawi a great place to visit, but it’s wise to learn about the different types of weather before booking that perfect vacation.

For those that are accustomed to the usual four seasons of spring, summer, autumn and winter, Thailand may seem like a different planet! Its summers and winters may seem backward although It is usually warm all year round with temperatures ranging from an average of 27 degrees Celsius (81°F) during the coldest month of July to about 29 (81°F) during the hottest month of February.

With that said, rather than traditional seasons, Langkawi experiences only a wet season and a dry season. In terms of traveling, these are known as the low season and the high season respectively. This is because many tourists only prefer to visit during the dry season as to avoid the rain and possible monsoons.

Dry Season (high season):

November through March is the busiest time. During this time, Langkawi experiences the most traffic.

Following the heavy rains of the wet season, the plant life thrives creating beautiful sights.

Due to the high influx of visitors, many of the prices are raised to compete with demand.

Wet Season (low season):

July to October is when the Langkawi tourism business slows

The rain varies in levels of intensity. Sometimes intense flooding is possible.

On many occasions, the rain doesn’t last long but is very strong

During this time, boat travel is not always available

For those looking to hire a Koh Lipe ferry to Langkawi, it may still be possible to do during the wet season as long as the travel plans are made to be flexible. However, traveling by ferry from Langkawi to Phuket or even hiring a Langkawi to Krabi ferry is not recommended during the wet season.

During the dry season, it’s extremely common to find a ferry between these popular travel destinations. In fact, it is the preferred way to travel as many places in and around Thailand are too small to have their own airport.

In either season, wet or dry, it is usually possible to hire a ferry to KohLipe to Langkawi and vice versa without any problem. They offer very competitive pricing and have experience in transporting tourists and locals alike from island to island. There are also speed boats available as well for those looking for a faster ride.

It is important to choose the time of year carefully to get the best experience in Langkawi. Of course it all depends on of the preferences of each and every traveler, but usually, a vacationer wouldn’t want to spend their getaway avoiding a flood! On the other hand, some may be adventurous and find exactly what they’re looking for no matter the weather!

Posted in homepage | Comments Off

Cellular Or Mobile Phones: How Are They Affecting Children And Us?

I am sure you are using one of them, like almost everyone else doe’s including me. As you become aware about some things, most likely you will be making changes the way you use a cellular phone from the information and awareness you be reading about.

There are as many as over 7 billion mobile phone subscriptions worldwide. Continued research to clarify any health risks coming from cell or mobile phones is ongoing. The first thing to come to mind is electronic radiation such as changes to sleep patterns and brain activity. Lots of evidence demonstrates that radiation from cell phones is a real danger.

Many different researches over years have confirmed that long-term exposure to cell phone radiation is a significant risk to health. Such findings of course are strongly denied by the other side of that argument, depending on which side of the argument you listen to. Debates like this have been ongoing for years and most likely will never be settled. After all, why would designers and manufacturers admit to any danger coming from phone usage? This would certainly kill the goose that lays the golden eggs!

The international agency for research, which is part of the world health organization released a statement over five years ago and declared cell phones a class B Carcinogen.

Long Term Exposure: How Long Is Too Long?

Whatever the brand name, I Phone, blackberry, android, tablets, Smartphone’s or just a basic flip phone has revolutionized communication in the 21st century. Some people spend as much as 2 ½ hours or more on the phone daily. Because cell phones are providing an efficient and easy way to communicate, but at the same time this can also take a toll on health.

The possible effect of a long-term heavy use of any mobile phone and the length of each call matters. The amounts of time people use cell phones are important factors which enhance the health related risk. The amount of radio frequency energy from a mobile phone use being released depends on different factors, such as distance from face and ear, the type of phone used, and the distance between cell phone towers.

What these findings are telling us: Make your conversation on a cell phone as short as possible or better still use a hand free device which places more distance between your head and the phone. Turn off the phone when not in use. Use the speaker phone when possible. Keep your phone away from your body as much as you can. Never use your phone while driving or even worse texting; this puts you and others in a potentially dangerous situation.

Children Are More Vulnerable

Children have the potential being at greater risk and affected in different ways. The brain of a child is not fully developed until the age of around 20. This makes any exposure to electronic radiation and radio frequency more dangerous for children than for adults. The other issue which affects a big percentage of children as well as teenagers is eye vision. Looking at mobile screens, what is it doing to kids’ eyes? Almost at any age children love playing with smart phones but what are the long-term effects?

Unfortunately some people are using such gadgets as baby sitters for the children without being aware of the damage it does. Children like to watch things close up on screen which is contributing to spike in becoming short-sighted. Studies have shown there is an alarming increase that affects many children between 10 and 12 years old and the amount has doubled over the last decade. The fact is: The more kids watch things close up on screen, the more they put their eyes in danger.

It is most common for children to develop myopia which gives a blurry long-distance vision. Myopia can also increase the risk of other eye problems in adulthood as well, including cataracts and blindness. However, most of the myopia cases are as young as six and 15 to 18, of course genetics play a role in severity in this.

As a guide, reduce screen time to as little of 2 hours per day from 2 to 5 year olds. There should only be a small increase of time allowed for older ones. Actually in Taiwan, if a child under the age of 2 has been found with a tablet or playing with any cell phone the parents will get a heavy fine.

Children who spent more time outdoors in fresh air and sunshine have a far lower rate of myopia. Limit the screen time, encourage kids to spend more “green time” hours in nature outdoors for better health. Make sure to include a colorful veggie diet from leafy greens which contain lutein, this is known to help eye sight and vision.

In General Common Sense Applies

A cell or mobile phone for most people has been one of the most revolutionary developments in time. It is a great communication tool being able to carry it with you wherever you go. It is a good security and emergency device that can save lives. So, what is wrong with all of those gadgets?

Could it be just the one who is using it creating that problem?

There are too many people going to the extreme and don’t know what is any longer normal or reasonable. That also applies to our food intake, beverages, including alcohol, and tobacco etc. All of those are not, or less harmful if used in moderation. If only used for short time this also can apply to cellar or mobile phones, and can reduce the risk factor as much as eighty percent.

Posted in homepage, Uncategorized | Comments Off

The Importance of Automotive Filter Changes

Humans require clean, easy-to-breath air in order to live. And just like humans, vehicles also need to be able to “breathe” clean air in order to survive. While human lungs make it possible to breathe, a vehicle’s air filters do just the same. But after some time, they begin to accumulate mass amounts of dirt, debris, and other airborne particles, which eventually decreases their quality and function. For this reason, it is critical to have your vehicle’s engine and cabin air filters inspected and changed on a routine basis to promote safe and efficient driving. Continue reading to learn more about the importance of routine automotive filter changes.

Air Filters

Keep in mind that your car’s air filters are your first line of defense against irritating and obstructive airborne contaminants. Dirt, dust, pollen, mold spores, exhaust gases, bacteria, and more are examples of airborne contaminants that have the ability to negatively affect the quality and performance of your engine and vehicle as a whole. And according to Community Car Care, there is a 1 in 5 chance that YOUR car needs an air filter change right now! Many drivers are guilty of overlooking this small but highly-necessary scheduled maintenance.

Engine Damage

The long list of airborne contaminants can have a powerful impact on your vehicle’s engine, and in a very negative way. Everything from pistons, cylinders, and cylinder walls, to piston rings and bearings, are just a few areas of a car engine that can begin to lose performance value from clogged or dirty air filters. Over time, neglecting to change them can lead to serious engine malfunctions and breakdowns, which means frustrating, costly repairs.

Cabin Filters

If you like to have clean, breathable interior air that smells good, you need to change your air filters on a routine basis. Once they start to become clogged, they begin to slowly lose their ability to do their job. So once they are entirely clogged, you can suffer some mild but irritating consequences, such as musty smells, sore throat, coughing, itchy eyes, tightening of the chest, and more. Changing them regularly keeps the interior environment of your car fresh and easy to breath.

Schedule

Refer to your vehicle’s owners’ manual for the manufacturer recommendations on factory scheduled maintenance. The general rule of thumb is to have your air filters inspected and changed every time you take your car in for an oil change. In fact, it is often a part of oil change packages. This should be every 3,000 miles or so. Talk to your mechanic for professional advice.

Posted in homepage, Uncategorized | Comments Off

Investing In Quality Auto Repair Services – Is It Worth It?

Auto Repair Services- Why You Should Invest In Quality Auto Repair Services?

Investing in quality auto repair services can help you enjoy a safe and smooth drive. While you can always take a DIY approach for the general car maintenance services such as an oil change, tune-ups or diagnostics but always hire a professional for the complex car problems. If you want to get a better value of your car in future then you should know how to take care of your car.

Choosing A Quality Repair Shop

Always get referrals/recommendations from your friends, relatives, coworkers and other people you trust. Co-workers can help you find a good repair shop in your locality. It is always a good idea to find a good repair shop before you need one. This way you won’t have to pick someone randomly.

Thanks To The Internet!

Look online to learn about the top repair shops operating in your locality. Compare the different quotes to choose the best deal. Ask them to show the license and also check whether it’s an updated license or not.

Consult local consumer protection agency to see if there is any complaint against the repair shop from the old or existing customers. Above all, you should make sure that they can fix the problem easily.

Tips

Have a look at some of the following tips to consider before you start your search for the best repair shop:-

Tip 1

Read The Car Manual

You should always take time to read the manual and understand the specific instructions mentioned in the schedule. A manual has all the necessary information. So you should go through all the instructions carefully before choosing any repair station.

Tip 2

No Quick Decisions

Remember, it’s always a good idea to shop around for the best deal before you meet a breakdown. It will help you to make the right choice because you are not choosing someone randomly. Never ever choose a repair shop/repair mechanic without checking the testimonials. A little bit of research can help you choose the right service provider for your car.

Tip 3

Word Of Mouth

It is always a good idea to get referrals/recommendations from your friends and family. Word of mouth is still considered as one of the best ways to find a reliable professional.

Conclusion

Put a little bit of effort to find quality auto repair services. It will give you many benefits in the long run.

Happy Driving!

Posted in Uncategorized | Comments Off

Ethernet Cables – Red, Yellow, Or Blue?

Ethernet cables come in many colours, it’s common to see red, green, blue, yellow, white and grey leads in every office. A lot of people get confused when they are buying a new lead as they wrongly believe the different colours do different jobs. A coloured Ethernet cable is used for identification. If you have an office network that has many connections, it can be difficult to know which cable goes where. This is why coloured leads are used, you can easily identify that the blue cable is connecting computer A to the network whilst the yell one is connecting computer B and the green goes to computer C. It’s not uncommon to see leads being sold in twenty plus different colours.

Another reason to use coloured leads is to help set up new equipment. Many internet service providers will send a free modem to the customer when they take out a new connection. Not everyone is confident at setting these modems up, they can come with two different types of lead, an RJ11 ADSL lead and an Ethernet cable. Both of these cables look very similar and many people try to connect the RJ11 lead into the Ethernet socket. Internet service providers use coloured leads for this very reason. The instruction book will advise the customer to connect one end of the blue Ethernet cable (or whatever colour is supplied) to socket A on the modem and then to your computer, this avoids any confusion and probably saves them from thousands of technical helpline calls each year.

Whatever the reason for replacing your Ethernet cable, maybe you need a longer length as you have moved the computer, the dog may have chewed your original, you may be trying to increase the speed with a better quality cable (we cover that in another article) or you may simply have lost the lead when you moved house. You can rest assured that you can use any coloured Ethernet cable. The only caveat to add would be to ensure you do not buy a Crossover cable, these are used to connect two computers together without using a router, they are always clearly advertised as Crossover and it would be difficult to buy one in error.

If you are looking to upgrade the speed of your connection, an easy and cheap upgrade is to opt for a Cat6 cable. Cat6 cables are cable of faster Gigabit speeds and are backwards compatible with standard Cat5e systems.

When buying a new lead it’s a good idea to look online, there are big savings to be had. Many online stores can sell at a fraction of the price a high street store as they have less overheads. For a short two meter cable, you should expect to pay around three pounds.

Posted in Uncategorized | Comments Off

All You Need To Know About The PTFE Ring Gasket

Gaskets are one of the basic elements for preventing the leakage, mist formation, and spray outs after the flange guards. They are installed at the flange joints, pipelines or valve joints, etc. to prevent the leakage of the harmful gasses and liquids from the gap between the joints. The gaskets are proven to seal the gap between the surfaces of the joints and provide better protection at an affordable price. They bear the high pressure of the high-temperature chemicals and have corrosion resistance properties. They are used in many industries like automotive, aerospace, chemical industries, electronics, military industries, pharmaceuticals and appliances.

The Types Of The Loads That A PTFE Ring Gasket Bear Are As Follows:-

The initial compressive load is the bolt load which pulls the gasket material into surface defects to form a strong seal.
The hydrostatic end force which tends to separate the surfaces of the flange joints when the arrangement is over pressurized.
The internal load pulling the part of the gasket exposed to inner force. It tends to blow the seal out of the joint.
The various metals and materials are used to make gaskets which can meet the demand of various industries. The range covers non-metallic, semi-metallic and metallic gaskets. The industries mostly install PTFE ring gaskets which are made up of a material and provide better performance in the operation.

This type of the gaskets used widely in the chemical industries and pharmaceuticals because it avails numerous benefits, besides acting as the protective seal for the leakage. It reduces friction to provide a rigid usability and avoid any of the damage or failures.

There Are Many Factors That Are Affecting The Performance Of The Gaskets:-

The Flange Load – The pressure on the two surfaces of flange joints churns the product and compresses the gasket to create an even tighter seal. The gaskets are enough tough to bear this load and the bolts of the joints should be tightened enough to create a perfect seal.

Temperature – The high temperature sometimes affects the efficiency of the product, but the gaskets are made of the high-grade material which is actually temperature resistant.

Fluid – The chemicals flowing through the pipelines is highly corrosive in nature and the liquids are harder to sell in comparison to the gas. The PTFE ring gaskets seal the liquid and prevent it from flowing outside. The product also prevents the contamination of the liquid.

Posted in homepage | Comments Off

Growth Consultant: Giving New Direction To Your Business!

Earning substantial profit is the main objective of every business and for this it is imperative that your business grows in significant direction keeping pace with changing scenario. Because, if a businessmen continues to follow conventional methods of conducting business he might not be able to stay even in competition with his contenders and may lag in competition.

For the continuous growth of business it is indispensable to keep a strict eye on every change taking place across the business world. The relevance of keeping an eye on changing scenario increases more today’s age because today as an impact of globalization business operators are blessed with vast opportunities of exploring their business throughout the world in short span of time.

Days have gone back when business operators centralized their activities within a limited region, but now the time has arrived when they need to move ahead by eliminating cultural and demographic traits and transfer their orthodox business model into customer centric, best in its segment, broadening potentials of growth with feasible profits from business.

To assist the business owners in moving their business according to changing environment, growth consultants can play an incredible role in getting the infrastructure of their business keep changing in accordance to global market.

The growth consultants provide their expert advice and suggestions to business groups and may even help them in getting those suggestions implemented in organization in determined strategy. These consultants make business operators understand the drawbacks of orthodox business concepts and make them realize the changing role of not so recognized sections like women and youth in growth of an organization. They make business owners understand the contribution which they can make in exploring their business.

Moving ahead they also make them realize the changing nature of consumer behavior and how they can succeed in offering varied services and products to their multicultural consumers located in different regions of world.

The consultants of growth help business groups in:

1. Re-evaluating the core targets and models of their business

2. Identifying the gaps in their value delivery systems

3. Make them understand whether their strategies of VP communication are misfiring or not;

4. Generating the identity of their brand in accordance with values, beliefs and strengths of new worlds market place (NWMP)

5. Selecting and strengthening their value propositions and competitive differences

But sharing business details with an unknown person is not an easy task for any business operators and therefore it is necessary to get assured that information shared with consultant will stay restricted only with him and not affected by any kind of elusion. The selection of growth consultant should be done after proper research about his past experiences and knowledge.

As a general practice need of a growth consultant is felt when:

1. Growth of your business has stagnated

2. You are not able to make appropriate use of the available sources

3. When you are speculating to introduce a new initiative in market

How do growth consultants assist the business groups?

The growth consultants conduct an intensive study of every aspect related with your business on your behalf and then point out the pros and cons of your business comparing with your contenders.

After analyzing your business they find potentials of your growth keeping the changing atmosphere and making system approach for your business according to recent trends. They also help you in assessing the results and difference in your business after implementation of their recommendations. This strategy will help you in achieving desired success in your business in appropriate direction.

Posted in homepage | Comments Off

What Is Computer Aided Engineering And Computational Fluid Dynamics?

Computer Aided Engineering (CAE)

CAE is the broad use of computer software with the aim to aid engineering tasks. It is a broad field that involves computational fluid dynamics, finite element analysis, optimization and multibody dynamics. Software tools developed to support the activities are known as CAE tools and they can be used in different application, including analyzing robustness and also performance of assemblies and components.

Computer aided design has indeed revolutionized modern engineering as it allows easier development of products and management integration of the same. It has also made modeling greater and offers basis for virtual networking. In the engineering world, the design is used widely to develop products to meet consumer expectations. It is this knowledge that makes engineering students and professionals important because of the benefits they bring to the engineering workforce.

Using computer aided engineering designs can be simulated in all kinds of scenarios without any physical change to the model. The technology is therefore widely applied to engineering applications. It comes with drawing benefits, project management benefits and networking benefits as well. It is applied to fields like aviation, space, shipbuilding and automotive industries. Computer aided engineering systems are supportive to businesses because they can place information views into the business process and make reference architectures useful especially when it comes to manufacturing models and products.

Computational fluid dynamics (CFD)

This is a discipline that falls under computer aided engineering and is used to engineer products and process designs as well as fabricate and analyze all elements involved in the processes. The technology also falls under fluid mechanics that rely on numerical methods and algorithms to analyze and solve problems that are related to fluid flow as well as heat transfer. Computational fluid dynamics are made up of three phases:

· Pre-processing that defined computation fluid dynamics models that include physics environmental factors, geometry and boundary conditions

· Analysis which offer solution of transport equation using the computational fluid techniques

· Post processing which involves results using visualization tools

CFD started way back in the 1960s with the first successes becoming prominent in 1970s. In services industry it took effect in the 1980s and the industry significantly expanded in the 90s. CFD packages continue to develop and significant changes are definitely expected in the future. The knowledge on how fluid flow and the quantitative effects of solids that are in contact helps:

· Architects and building service engineers to provide safe and comfortable human environments

· Power plant designer to achieve maximum efficiency and also reduce pollutant releases

· Chemical engineers in maximizing yields from processing equipment and reactors

· Designers of marine, air and land vehicles to achieve maximum performance at minimum costs

· Safety engineers and risk-and-hazard analysts to make predictions of the damage extent of structures, human beings, vegetation, animals and even equipment as a result of blast waves, explosions and fires

The flow simulation also proves helpful to the metropolitan authorities in determining pollutant emissions, meteorologists in foretelling water and wind current, petroleum engineers in designing oil recovery strategies among many other applications.

Posted in homepage | Comments Off

Importance of Information and Communications Technology (ICT) In Our Daily Life

Information and Communications Technology (ICT) has an important role in the world since we are now in the information age era. With ICT, the company can make the business easier to happen with the client, supplier and the distributor. It is also very important in our daily lives. The lack of appropriate information at the right time will result in low productivity, low quality research works, and waste of time to pursue information and even to do research which actually others had done or in other countries. Nowadays ICT cannot be separated with our daily needs.

ICT has a great impact in our daily lives. For example, we can read our local newspaper using the online newspaper. Another example is we still can get connected with our family, relatives, or colleagues even if we are abroad by using the electronic mail, yahoo messenger, call conference, or video conference.

Digital computer and networking has changed our economy concept to the economy with no boundary in time and space because of ICT. It brings a lot of advantages for economic development enabling millions of transactions to happen in an easy and fast way.

ICT is one of the economic development pillars to gain national competitive advantage. It can improve the quality of human life because it can be used as a learning and education media, the mass communication media in promoting and campaigning practical and important issues, such as the health and social area. It provides wider knowledge and can help in gaining and accessing information.

ICT has become an integral part of everyday life for many people. It increases its importance in people’s lives and it is expected that this trend will continue, to the extent that ICT literacy will become a functional requirement for people’s work, social, and personal lives.

The use of ICT in education add value in teaching and learning, by enhancing the effectiveness of learning, or by adding a dimension to learning that was not previously available. ICT may also be a significant motivational factor in students’ learning, and can support students’ engagement with collaborative learning.

Information and Communications Technology (ICT) is basically our society’s efforts to teach its current and emerging citizens valuable knowledge and skills around computing and communications devices, software that operates them, applications that run on them and systems that are built with them.

As a matter of fact, we are living in a constantly evolving digital world. ICT has an impact on nearly every aspect of our lives – from working to socializing, learning to playing. The digital age has transformed the way young people communicate, network, seek help, access information and learn. We must recognize that young people are now an online population and access is through a variety of means such as computers, TV and mobile phones.

It is in this premise that educational technology and e-learning is taught in or out of the classroom since educational technology is used by learners and educators in homes, schools, businesses, and other settings.

Posted in Uncategorized | Comments Off